Winmate Military M270TF-MIL, Руководство пользователя

Страница: 6 / 54

Military 4K UHD Display vi
On Installation
• Prevent internal heat build-up allowing adequate air circulation.
• Do not place the unit on surfaces (rugs, blankets, etc.) or near materials
(curtains, draperies) that may block the ventilation holes.
• Do not install the unit near heat sources such as radiators or air ducts, or in a
place subject to direct sunlight, excessive dust, mechanical vibration or shock.
• Do not place the monitor near equipment which generates magnetism, such
as a transformer or high voltage power lines.
About the LCD Display Panel

The LCD panel fitted to this unit is manufactured with high precision technology, giving a
functioning pixel ratio of at least 99.99%. Thus a very small proportion of pixels may be
“stuck”, either always off (black), always on (red, green, or blue), or flashing. In addition,
over a long period of use, because of the physical characteristics of the liquid crystal display,
such “stuck” pixels may appear spontaneously. These problems are not a malfunction.

Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when
you place the unit by a window.

Do not push or scratch the LCD screen.

Do not place a heavy object on the LCD screen. This may cause the screen to lose uniformity.

If the unit is used in a cold place, a residual image may appear on the screen. This is not a
malfunction. When the monitor becomes warm, the screen returns to normal.

The screen and the cabinet become warm during operation. This is not a malfunction.
About the Screen Protect Panel
The screen protect panel is made of toughened glass, but there is a possibility that it may crack.

Handle with care. Avoid strong impact, such as dropping from a high place or an object
swinging into it.

Do not scratch the panel with a sharp object or place it in harm’s way.