Wireless Contact FM.A
Operating instructions
1. Product description
The FM.A wireless contact is a visible,
energy self-sufficient radio contact, which
is fixed to the window. It is visibly installed
on the window frame, enabling detection
of opening and closing procedures of a
window in combination with a magnet
attached to the sash. After the teaching
process the signal is wirelessly transmitted
to a subsequent EnOcean-compatible
component or a subsequent EnOcean-
compatible smart home system, using an
EnOcean radio protocol.
A possible application of the sensor is
heating control. In combination with
suitable heater actuators it is possible to
turn the heating down and hence to save
energy when the window is open. Further
solutions include the connection of a relay,
e. g. to activate or deactivate air con-
ditioners or ventilation systems. It is also
possible to control the window by means
of appropriate alarm sensors and control
centres.
2. Scope of delivery
1 x Wireless contact FM.A
2 x Contactor FM.A
2 x Adhesive pad for radio contact FM.A
2 x Adhsesive pad for contactor FM.A
1 x Operating instructions
3. Product information
Technical data
General data
Designation
Wireless contact FM.A
Operating
temperature
0 °C up to +60 °C
Suitable for
Windows and doors
made of PVC-U, timber
or aluminium
Air moisture
0 % – 93 % relative
humidity, non-condensing
Protection
type
IP 30
Storage and
transport
conditions
+10 °C up to +30 °C,
< 60 % relative humidity,
non-condensing
Mechanical data
Dimensions
sensor W/H/D
70 x 9 x 20 mm
Universal
magnet W/H/D
14 x 5.0 x 15 mm
32 x 5.2 x 11 mm
Material
(housing)
Polyamide
Fixing type
Adhesive bonding to
plane surface
Max. distance
of magnet to
radio contact
approx. 5 mm
Fixing place
Window or door frame in
well-lit places
Magnets
Teaching
button
Solar module
