11
Operation
12
PRODUCT SET-UP
PRODUCT OPERATIONS
Energy Saving Mode
Turn Hot Water Switch
Off at the back of the
unit for Cold Water only.
Turn Hot Water Switch On
at the back of the unit for a
choice between Hot and
Cold water.
After installing your product
in the right space, connect
tube from Water Supply to
Water Supply inlet on your
product.
Plug product in.
Wait for about 15
minutes for hot water
and about 30 minutes
for cold water.
Load paper cups into
cups dispenser
(W-5C and W-5D only)
Water
supply valve.
Models : W-5C, W-5D
Push “Cold” or “Hot Water Safety Switch” to dispense
water. Both Hot and Cold water will be released from
the same outlet. Hot Water Safety Switch requires to
be pushed up and forward to release Hot Water.
Grab one cup at a time,
as shown on the picture
below.
Place cup on drip tray
underneath water outlet.
Hot water
While pushing hot safety
water button, push it up.
Cold water
Push cold water button.
Turn Water Heating system On/Off at your convenience based upon your needs.
Models : W-5C, W-5D
