VERSION 1
05/01/2021
I
NSTALLATION AND
U
SAGE
G
UIDE
WINESP40CEPRO
Page 25
5.1
LIFT PUMP MAINTENANCE
CAUTION
Before starting any work on the machine, make sure that it is disconnected.
If there is any problem with the condensate removal flow, check that the pipes are not blocked and clean
the pump sensor container. This should be done once a year.
Reverse the order of operations for reassembly.
Step 1: Pull the black cladding off
the indoor part and bring it down.
Step 2: Dismantle the hatch by
unscrewing the six screws and bring it
down.
Seal
Step 5: Inject water through the smaller
opening in the pump sensor.
Step 4: Open the pump sensor and
remove any deposit in the container.
DO NOT REMOVE the seal.
Step 3: Take off the tubes. MIND YOU
DO NOT disconnect the connector.
