INSTALLATION
AND
USER
MANUAL
WINESP40CAPRO
Page 15
4.2.
Start up
4.2.1.
Temperature setting
The setting of the targeted temperature is made on the thermostat:
-
Press on
one second until the targeted temperature is blinking.
-
Use
to increase the temperature.
-
Use
to lower the temperature.
-
Once the right temperature is set, press on
again to confirm.
Explanations on the main display symbols: :
Red light
= cold more engaged (compressor working)
Red light
= cooling fan on high speed
Red light
= defrost
Red light
= heating mode engaged (resistance)
4.2.2.
Standby mode
-
Standby mode: maintain 3 seconds on button 1. The compressor stops
and the fan turns at low speed.
-
The thermostat indicates « OFF » and also the cellar temperature.
-
To come back, maintain again a 3 seconds pressure on button 1.
-
The thermostat indicates « ON » during 1 second
-
4.2.3.
Automatic defrost
The program of the thermostat will run an automatic defrost time several times a day. During this
operation, the compressor is stopped, only the fan is functioning at low speed. The condensate water
produced during this period will be evacuated through the tube drain.
