Remove the bolts holding the reflector bracket to the skew housing.
NOTE
If replacing a Slimline assembly with a DISH
assembly,
remove and set aside the stiffener
plate inside the reflector bracket.
Remove the LNB arm assembly, and set aside.
NOTE
If replacing a Slimline assembly with a DISH assembly
, remove the four bolts from the
adaptor plate, and remove the adaptor plate.
NOTE
If replacing a Slimline assembly with a DISH assembly,
align the small post on the back
of the DISH 1000 adaptor plate with the small groove on the skew assembly hub. Fit the
small post into the groove. Secure the adaptor plate to the hub with the four supplied
¼
inch Allen screws.
7
Stiffener
plate
6
Skew housing
Reflector bracket
Bolts
Adaptor plate
Installing the DISH Reflector and LNB Assembly
Groove
Post
