Adding a SIM Card
(continued)
Step 2 -
Locate the SIM card slot on the backside of the Gateway 5G. A portion
of the Winegard FreedomGo SIM card (SIM0) is exposed. It is not necessary to
remove this SIM as Winegard Data is always available for purchase.
Step 3 -
In the upper slot (SIM1) of the dual SIM Connector, insert the NEW
carrier’s SIM card with the metal electronic chip facing the electronics board
and the angled corner in the correct position, as shown below. If the SIM is
inserted incorrectly the SIM will not be recognized and an error code will be
displayed on the Status page.
Step 4 -
Turn the Gateway 5G power switch on.
Step 5 -
Return to the
Status
page of the Winegard
software by following steps 1-3 on page 8. Next,
navigate to the
Change Provider
page. Select the SIM
SELECTION drop down menu and choose the correct
SIM. Verify that the correct cellular provider is listed in
the CELLULAR PROVIDER field and that the correct
APN from the table below matches. Once verified click
on the Change Provider button.
Cellular
Provider
APN
(Access Point Name)
T-Mobile
fast.t-mobile.com
AT&T
broadband
18
1
2
3
R
es
et
Powe
r
E
therne
t
4
5
6
Dual SIM
Connector
Place in
upper slot
Angled
corner out
S
IM
Re
d
Gr
een
Yello
w
Gr
een
Yello
w
