manualshive.com logo in svg

Winegard ConnecT 2.0, Инструкция по установке и эксплуатации, Страница: 2 / 14

Поделиться
Скачать
Winegard ConnecT 2.0 Скачать руководство пользователя страница 2

Parts Included: 

Specifications:

WARNINGS:

(1) Extreme 2.0 outdoor unit
(1) Power Over Ethernet power 
       inserter (POE) 

indoor only

(1) L-pipe

(1) Wall mount
(1) Pipe  mount
(1) Insert  
(1) Hardware bag 

• Dimensions: 9.35" diameter, 8" tall
• Wireless standard: 802.11a/b/g/n/ac
• Frequency band: 2.4 GHz/5 GHz
• Amplifiers: 3x3 MIMO
• Antennas: (3) 2.4 GHz/5 GHz

• Wireless security: 

WPA-PSK (TKIP) 
WPA2-PSK (AES) 
WPA-PSK (AES) & WPA2-PSK (AES)
WPA2-PSK (AES) & WPA3 (AES)

• Port: (1) RJ45 10/100/1000
• Power rating: Switching, AC input 100-240V, 1.5A 
• POE: 

Not intended for outdoor installation

• 

Read this manual

 carefully and completely before attempting to assemble, install, or operate this product. Winegard 

recommends that a professional technician installs this equipment.

• 

Save

 these instructions.

• POE MUST BE INSTALLED INDOORS.

• DO NOT MOUNT OVER CHIMNEY OPENING. 

• Never install unit upside down

. Improper installation will cause product damage.

• 

Do not paint 

any portion of the Winegard Extreme 2.0. This could damage the system and will void the warranty.

• When you initially set up the Winegard Extreme 2.0, we recommend you 

check for software updates

 the first time you 

connect the system to an internet signal. We also recommend you check for updates every couple of months for fixes 
and added features.

Items required:
Bolts/screws for wall mount 
7/16" wrench 
Phillips screwdriver
Ethernet cable(s)

2

Содержание ConnecT 2.0















Отзывы:

Нет отзывов