23
To replace or adjust the locations of the panels and
Supply Collar please see the instructions below:
1. Determine which panel needs to be replaced
(Fig 1).
2. Use a flat blade screwdriver, coin, or other
suitable tool at the captive fastener (Fig 2).
3. Apply a simple, quarter turn counterclockwise to
allow the fastener to disengage from the
housing (Fig 3).
4. Remove the panel by sliding the panel/collar up
to disengage the bottom hook from the housing
before completely removing the panel/collar
from the unit (Fig 4).
5. To replace the panel/collar, simply reverse the
previous steps. Press the panel against the
opening and slide it down to connect the bottom
hook of the panel/collar to the housing (Fig 5).
Push the top of the panel in and line up the
fasteners with holes in the housing. Insert the
tool into the fastener and quarter turn it
clockwise to lock into place.
Duct Collar and Panel Adjustment
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Содержание 99H0204-20
