Wine Corner WINEMASTER WINE ARM 15, Инструкция по установке и эксплуатации

Страница: 9 / 18

2. INSTALLATION OF THE WINEMASTER
®
CONDITIONING UNIT Cont.
2.2.3 INSTALLATION OF THE WATER DRAIN-OFF
The conditioning unit has a condensate evaporation system. However, there is an overflow to evacuate excess water
caused by the inadequate sealing of the cabinet or the doors remaining open for too long. You can drain off the water
using a PVC pipe to channel the water into a container.
2.2.4 INSTALLATION OF THE THERMOSTAT
The thermostat can be installed
in the cabinet, on the side of the
cabinet or outside the cabinet.
The temperature probe/sensor
(S) should be positioned
towards the return air zone (R).
We recommend that the end of
the sensor does not touch the
partition and is placed in the air
flow.
Page 9
IF THE POWER CABLE IS DAMAGED, IT MUST BE REPLACED BY THE
MANUFACTURER, ITS AFTER-SALES SERVICE OR PERSONS WITH A
SIMILAR QUALIFICATION TO AVOID RISK OF HARM.