Wine Corner WINEMASTER WINE ARM 15, Инструкция по установке и эксплуатации

Страница: 11 / 18

3. SWITCHING ON THE WINEMASTER
®
CONDITIONING UNIT
The thermostat displays the air temperature inside the air-conditioned room, within a range of 2°C. The thermostat
is factory-set to the setpoint temperature of 12°C. When the conditioning unit is switched on, you should check and
modify this temperature if necessary, following the relevant procedure (§4.2.1).
3.1. CONNECTING THE CONDITIONING UNIT
When you switch on the conditioning unit, the temperature of the room is displayed:
- If the temperature is higher than the thermostat setpoint (12
o
c), the conditioning unit will start after a 2-
minute time interval.
- If the temperature is less than the thermostat setpoint (12
o
C), the compressor will not start, and the interior
unit fan will begin to turn.
3.2. SWITCHING ON
3.2.1. Setting the temperature
The setpoint temperature is set on the thermostat:
• Press the button for one second until the setpoint temperature flashes.
1
• Use the button to increase the setpoint temperature.
2
• Use the button to reduce the setpoint temperature.
3
• When the temperature setting is correct, press the button to confirm
Meanings of the main symbols on the digital display:
Red light illuminated on display = cold mode engaged (compressor is running)
Red light illuminated on display = quick ventilation in cold mode
Red light illuminated and displayed “dF” = automatic defrost in progress
Red light illuminated on display = heat mode engaged (resistance)
Red light illuminated on display = alarm (a flashing message specifies the nature)
“IA” display = external alarm or door open (depending on version)
“dEF” display = Manual defrost in progress (see 1.2.4)
The unit will be delivered with a setpoint of 12
o
C. Unless directed by a Winemaster Engineer,
there will be no need to change the setpoint, whatever the circumstances.
Page 11
IMPORTANT: AFTER TRANSPORT OR HANDLING, WAIT 24 HOURS
BEFORE SWITCHING ON THE CONDITIONING UNIT.