Windsor TRACER FS, Руководство по эксплуатации

Страница: 23 / 39

MAINTENANCE
QTFSB 98351 04/25/03
4-4
HYDRAULIC FLUID LEAKS
Pressurized hydraulic fluid spraying from a very
small hole can be very hard to see. Do not use
hands to locate the leak. Use a piece of cardboard
as shown below to find leaks.
When servicing machine, use a sheet of
cardboard to locate leaking hydraulic fluid under
pressure. Keep eyes and hands clear of leaks.
Escaping hydraulic fluid under pressure can
cause severe injury.
A – Hydraulic Line
B – Cardboard
C – Pinhole Leak
HYDRAULIC FILTER
The hydraulic filter keeps the machines hydraulic
system clean to a level of 10 microns. The hydraulic
fluid filter is located just inside the left rear frame.
The filter should be changed every 500 hours.
TO REPLACE FILTER ELEMENT:
1. Stop the engine and set the parking brake.
2. Open the seat support.
3. Unthread and discard the hydraulic fluid filter
element.
4. Apply a thin coat of hydraulic fluid to the seal of
the new hydraulic fluid filter element.
5. Thread and hand tighten the new hydraulic fluid
filter element on the filter head.
6. Close the seat support.
7. Operate the machine and check for leaks.
Correct any leaks found.
8. Check the hydraulic fluid reservoir level and fill
as required.