background image

To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com

INSPECTION

Carefully unpack and inspect your extractor for shipping dam-

age. Each unit is operated and thoroughly inspected before ship-

ping, and any damage is the responsibility of the carrier, who
should be notified immediately.

ELECTRICAL

This extractor operates on a standard 15 amp 115 volt AC cir-
cuit. *Voltages below 105 volts or above 125 volts could cause
serious damage to motors. 
 *Special voltage models available.

WARNING: 

To avoid electric shock

:

1.   Use indoors only.

2.   To reduce risk of fire, do not use volatile substances.

3.   Use only cleaners intended for carpet application.

   
   

   

 

 

NOTE:  Au Canada, l’utilisation d’un adaptateur 

temporaire n’est pas autorisée par le 
Code canadien de l’électricité.

NOTE: In Canada, the use of a temporary adaptor is 

not permitted by the Canadian Electrical Code

GROUNDING INSTRUCTIONS:

This appliance must be grounded.  If it should malfunction or

break down, grounding provides a path of least resistance for

electric current to reduce the risk of electric shock.  This ap-

pliance is equipped with a cord having an equipment–grounding

conductor and grounding plug.  The plug must be inserted into

an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances. 

This appliance is for use on a nominal 120–volt circuit, and has

a grounded plug that looks like the plug in “Fig. A”.  A tempo-

rary adaptor that looks like the adaptor in “Fig . C”  may be used

to connect this plug to a 2–pole receptacle as shown in “Fig. B”,

if a properly grounded outlet is not available.  The temporary

adaptor should be used only until a properly grounded outlet

(Fig. A) can be installed by a qualified electrician.  The green col-

ored rigid ear, lug, or  the like extending from the adaptor must

be connected to a permanent ground such as a properly grounded

outlet box cover.  Whenever the adaptor is used, it must be held

in place by a metal screw.

WARNING: 

Improper connection of the equipment–grounding conductor

can result in a risk of electric shock.  Check with a qualified

electrician or service person if you are in doubt as to whether

the outlet is properly grounded.  Do not modify the plug pro-

vided with the appliance – if it will not fit the outlet, have a prop-

er outlet installed by a qualified electrician.

EXTENSION CORDS

If an extension cord is used, the wire size must be at least one
size larger than the power cord on the machine: The POWER

ESCORT is equipped with a 50 ft. 114/3 power cord.

 Do not

exceed the 50 ft. cord limit.

CAUTION:
To avoid possible distortion of polyethylene solution/
recovery tanks, DO NOT USE WATER TEMPERATURE
THAT EXCEEDS 140

°

 F (60

°

 C).

NOTE: 

Make sure dome is seated correctly to ensure proper vacuum

seal.

SUITABLE

INCOMPATIBLE

CHEMICALS

CHEMICALS

Alkalis

Aldehydes

Clorox II Bleach*

Aromatic Hydrocarbons

Defoaming Agents

Butyls

Detergents

Carbon Tetrachloride

Hydroxides

Clorox*

Oxygen Bleaches

Chlorinated Bleaches

Soaps

Chlorinated Hydrocarbons

Sta–Puf Fabric Softener*

D–Limonene

Vinegar Lysol*

White Monday Bleach*

Methyls (MEK)

Perchlorethylene(perc)

Phenols

* Registered Trademark

Trichlorethylene

CAUTION:
Use only the suitable chemicals listed below.  Using in-
compatible chemicals will damage the machine.  Dam-
ages of this type are not covered under the 6–3–1 war-
ranty.  Carefully read ingredients on manufacturer’s la-
bel before using any product in this machine.

3

98255  7/1/97

Содержание EPB2













Отзывы: