background image

To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution must 

always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

This machine is for commercial use.

WARNING: 

To reduce the risk of fire, electric shock, or injury:

1.

Do not operate without filters (dry or wet) in place.

2.

Use only as described in this manual. Use only manufacturer’s recommended attachments.

3.

Use indoors only. Do not use outdoors and do not expose to rain.

4.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this 
machine near flammable fluids, dust or vapors.

5.

Do not pick up flammable fluids, dust or vapors.

6.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

7.

Do not handle the plug or machine with wet hands.

8.

Do not leave the machine unattended. Unplug machine from outlet when in use and before servicing.

9.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before servicing.

10. Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

11. Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the

machine.

12. If the machine is not working properly, has been dropped, damaged, left outdoors, or cropped into 

water, return it to an Authorized service center.

13. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around

sharp edges or corners.

14. Do not pull/run machine over cord. Keep cord away from heated surfaces.

15. Do not allow to be used as a toy. Close attention is necessary when used by or near children.

16. Do not operate machine with any openings blocked. Keep openings free of debris that may reduce 

airflow.

17. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving

parts.

18. Use extra caution when cleaning on stairs.

19. Do not use machine as a step.

20. Connect to a properly grounded outlet. See Grounding Instructions.

21. Maintenance and repairs must be done by qualified personnel.

22. Rotating fan blades inside the cover. Before opening cover, switch off machine. Wait until the fan/brush

stops completely or dust and debris may be ejected.

 

SAVE THESE INSTRUCTIONS

2

98255  7/1/97

Содержание EPB2













Отзывы: