Windsor EM-21A, Инструкция по эксплуатации

Страница: 26 / 26

11 5V Page 26 of 26
PUMP PARTS LIST
NO. DESCRIPTION
65018
65010 Pump and Motor
Pump and Motor Asm..
230V
1
Motor, 115V
53017 Motor. 230V
2
67066
3 62023 Plate, Motor Mounting
4 36006 Grommet (set
of 4)
47015 Kit. Pump Repair
6 27057 Bearing Cover
41010 Pump Housing
72017 Pressure Switch
65016 Pump Complete
47023 KIT, ROTARY UNION BEARING
47026
KIT, ROTARY UNION SEAL
26
PROBLEM
No electrical power.
Loss of vacuum/
solution recovery.
No forward movement
of machine.
No solution flow.
Solution will not
shut off.
Uneven cleaning.
CAUSE
electrical circuit.
Faulty main power switch on machine.
Faulty power cord.
or circuit breaker tripped (on
machine).
lever in position.
Faulty motor switch.
Worn motor brushes or motor.
Crack in recovery dome
Obstruction or
in shoe linkage
or hose.
Incorrectly installed or adjusted
shoe.
Loose
wires at switch or connections.
Faulty drive motor switch.
Worn carbon brushes in gear drive motor
or faulty motor.
Fuse blown or circuit breaker tripped (on
machine).
Faulty speed control potentiometer.
Faulty pump drive motor.
Faulty pump.
Broken pump drive belt
Faulty switch.
"Clogged" or
solenoid.
Obstruction in thrusterjets.
Faulty thruster control switch.
Dirt in solenoid valve or faulty valve.
One or
thrusterjets plugged.
Broken rotary union belt.
SOLUTION
Check building circuit breaker or fuse box.
Replace switch.
Repair or replace power cord.
Replace fuse or reset breaker after correcting
problem,
Put lever in "on" position.
Replace swltch.
Replace motor brushes or motor.
or replace.
Remove obstruction, repair or replace
casting.
shoe.
Repair as required.
Replace switch.
Repair or replace motor
hose or reset breaker after correcting
problem.
Replace control.
Repair or replace motor
Replace pump.
Replace belt.
Replace switch.
Remove obstruction or replace.
Remove spinner assembly and clean jets.
Replace switch.
Remove obstruction or replace valve.
Remove spinner assembly and clean
Replace belt.