Windsor chariot iSCRUB 10060210 Скачать руководство пользователя

Страница: 5 / 61

86037660 CHARIOT 11/09/06

2-1

IMPORTANT SAFETY INSTRUCTIONS

When using an battery powered appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only

indoors. Do not use outdoors or expose to rain.

Use only

as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is

not working properly

, has been dropped, damaged, left outdoors, or dropped into water, return

it to an authorized service center.

Do not

operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

This machine

is not

suitable for picking up hazardous dust.

Machine can cause a fire

when operating near flammable vapors or materials. Do not operate this machine near

flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops
and offices for more than normal housekeeping purposes.

Maintenance and repairs

must be done

by qualified personnel.

If foam or liquid comes out of machine,

switch off immediately

Disconnect

battery before cleaning or servicing.

Before the machine is discarded, the batteries

must be removed

and properly disposed of.

Make sure all warning and caution labels

are legible and properly attached

to the machine.

During operation

, attention shall be paid to other persons, especially children.

Before use

all covers and doors shall be put in the positions specified in the instructions.

When leaving unattended

, secure against unintentional movement.

The machine shall only

be operated by instructed and authorized persons.

When leaving unattended

, switch off or lock the main power switch to prevent unauthorized use.

Only chemicals recommended

by the manufacturer shall be used.

This appliance has been designed

for use with the brushes specified by the manufacturer. The fitting of other

brushes may affect its safety.

Do not

use on surfaces having a gradient of over 10% (6 degrees).

SAVE THESE INSTRUCTIONS

Содержание chariot iSCRUB 10060210






























































Результаты поиска

Содержание chariot iSCRUB 10060210

Отзывы:

Похожие инструкции для chariot iSCRUB 10060210

Бренды по названию

Популярные бренды

Windsor chariot iSCRUB 10060210, Руководство по эксплуатации

Результаты поиска

Содержание chariot iSCRUB 10060210

Отзывы:

Похожие инструкции для chariot iSCRUB 10060210

Бренды по названию

Популярные бренды