19
Operations
Normal Scrubbing
Plan the scrubbing pattern in advance. The longest
track is around the perimeter of the area to be cleaned.
For efficient operation, the runs should be the longest
possible without turning, stopping, or raising and
lowering scrub deck/squeegee.
NOTE: In order to achieve the best possible results,
the area which is to be cleaned should be swept
before scrubbing. Large debris, strings & wire must
be removed to prevent being caught in brushes or
squeegee.
To Begin Scrubbing
When operating the machine around people, pay
close attention for unexpected movement. Use
extra caution around children.
Lorsque vous utilisez la machine en présence de
gens, portez une attention particulière aux mouve-
ments inattendus. Soyez plus prudent, surtout en
présence d’enfants.
Flammable liquids and/or reactive metals can
cause explosions or fire! Do not pick up.
Les liquides inflammables et / ou les métaux
réactifs peuvent provoquer des explosions ou un
incendie ! Ne les ramassez pas.
1.
Turn the machine power on.
2.
Lower the squeegee.
3.
Turn the vacuum on.
4.
Lower the scrub brushes to the floor.
5.
Turn the scrub brushes on (brushes will start when
machine is propelled).
6.
Drive machine forward to begin scrubbing.
NOTE: Shut machine off immediately if water or foam
is expelled from the machine.
7.
Adjust the speed of the machine, solution flow and
scrub brush pressure as necessary.
NOTE: Once solution flow rate is set it is not
necessary to shut off solution when stopping
scrubbing. Solution flow is automatically shut off
when brush motors stop. When brush motors are
activated, flow automatically resumes.
To Stop Scrubbing
1.
Release the propel levers.
2.
Turn the scrub brushes off.
3.
Raise the scrub brushes.
4.
Raise the squeegee.
5.
Turn the vacuum off.
6.
Turn the machine power off.
INEFFICIENT SCRUBBING PATH
RECOMMENDED SCRUBBING PATH
86400280 Operators Manual - Cutter 36V Standard
