10
Operations
Technical Specifications
SPECIAL NOTES:
The sound pressure level at the operator's ear was measured to be 75 dBA. This was a nearfield, broad-band
measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source of
impact noise. The instantaneous sound pressure level is below 63 Pa.
The weighted root mean square acceleration at the operator's arms was measured to be below 2.5m/s2 . This was
a tri-axial, third-octave-band measurement made during normal operation on a composite tile floor. The measure-
ment and related calculations were made in accordance with ANSI S3.34-1986.
ITEM
DIMENSION/CAPACITY
Nominal power
2160 W
Rated Voltage
36 Volt DC
Rated Amperage
60 amps
Batteries
6 x 6 volt 250-305-335 AH @ 20 Hr rate
Scrub Brush Motors
2 x .75 hp (.56 kW )
Vacuum Motor
3 Stage .75 hp (.56 kW )
Propelling Motor
.75 hp (.56 kW )
Mass (GVW)
1265 lb (574 kg) w/335 AH batteries
Weight empty without batteries
433 lb (196 kg)
Solution Control
Gravity feed, fully variable with automatic shut-off in
neutral
Solution tank capacity
32 gal (118 L)
Recovery tank capacity
35 gal (123 L)
Scrub brush diameter 32 in. (81 cm) scrub head
16 in (41 cm)
Scrub brush pressure
Mechanical, 80 lbs floating
130 lbs restricted (356n-578n)
Scrub brush speed
200 rpm
Tires
2 x 12 in (30.5 cm) Non-Mark Foam Fill
Casters
2 x 4 in (10.2 cm) polyurethane, Non-Mark
Foundation Pressure
64 lbs/in² (441 kPa)
Maximum Speed
3.2 miles/hour (5.2 kW/hour)
Frame Construction
Powder coated steel
Brakes (optional)
Tire lock parking
Minimum aisle u-turn width with 32 in. (81 cm) scrub
head
69 inches (175 cm)
Maximum rated climb and descent angle with empty
tanks and without optional parking brake
2%
Maximum rated climb and descent angle with full tanks
and without optional parking brake
2%
86400280 Operators Manual - Cutter 36V Standard
