background image

4

Safety

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precaution must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

WARNING

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturers recommended components and

attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into

water, return it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce

airflow.

Machine near flammable fluids, dust or vapors.

This machine is suitable for commercial use such as: in hotels, schools, hospitals, factories, shops, and

offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

During operation, use caution around other persons, especially children.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, unplug the machine.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug and not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the

machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp

edges or corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

If the supply cord is damaged it must be replaced by an authorized service agent.

Unplug before cleaning or servicing.

Operational hazard may occur when running the machine over the supply cord.

This appliance has been designed for use with pads specified by the manufacturer. The fitting of other

pads may affect its safety.

This machine is for dry use only and shall not be used or stored outdoors in wet conditions

Moving Parts - To reduce the risk of injury, unplug before servicing.

READ AND SAVE THESE INSTRUCTIONS

8.638-856.0 Manual Operators - Radiant Orbital Scrubber 

Содержание 1.005-297.0

































Отзывы: