9
3.3.a Table: Wind speed
Description
m/s
km/hour
Beaufort scale
Knots
Calm
< 0.3
< 1.1
0
< 1
Light air
0.3-1.5
1.1-5.4
1
1-3
Light breeze
1.6-3.3
5.5-11.9
2
4-6
Gentle breeze
3.4-5.4
12.0-19.4
3
7-10
Moderate breeze
5.5-7.9
19.5-28.4
4
11-16
Fresh breeze
8.0-10.7
28.5-38.5
5
17-21
Strong breeze
10.8-13.8
38.6-49.7
6
22-27
Near gale
13.9-17.1
49.8-61.5
7
28-33
Gale
17.2-20.7
61.6-74.5
8
34-40
Severe gale
20.8-24.4
74.6-87.8
9
41-47
Storm
24.5-28.4
87.9-102.2
10
48-55
Violent storm
28.5-32.6
102.3-117.3
11
56-63
Hurricane
> 32.6
> 117.3
12
> 63
3.4. Rain alarm
The fourth parameter that can be set is whether the rain alarm shall be active
or not active
.
An active rain alarm prevents water penetration. The rain alarm is pre-programmed to be active.
In active, the window closes if the rain sensor registers rain.
The window can still be operated using
, but will return to AUTOMATIC operation after 2 minutes.
A rain alarm is maintained for 5 minutes. If precipitation is detected again during these 5 minutes, the period
starts over again.
As long as a rain alarm is registered, the umbrella symbol will be shown on the display.
RECOMMENDED SETTING; ACTIVE
If a non-active alarm is selected, the window will
not
close even if it rains.
When the rain alarm blinks, select whether the alarm shall be active (
) or non-active (
)
Using
, select between
and
.
Confirm the choice by pressing the
key. The display will automatically change to setup for the next
parameter
– save the values (point 3.5).
