Read this Entire Instruction Manual Before Use.
For your reference:
Serial No.
Date of Purchase
Name and Address of Dealer
BEFORE INITIAL USE
TROUBLESHOOTING
PROBLEM
On/Off Switch is set to
On, but the On/Off
Indicator Light is off.......
No MIst.......
Condensation forms
around the humidifier or
windows......
White dust accumulation
(due to use of hard
water)
CAUSE
Unit is not plugged in.
No power at the outlet.
No water in the tank.
Unit is not leveled.
Mineral deposits are on
the magnetic ring/probe
sensor.
Water Tank was washed
with detergent.
Blower not operating.
Nebulizer is not operating
properly.
Mist intensity is set to
high for the room size or
preexisting humidity level.
Hard water was used
(contains to much
minerals)
SOLUTION
Plug in the unit.
Check circuits,
fuses, and test outlet
with a tester.
Fill tank with water.
Place on a level
surface
Clean the magnetic
ring/probe sensor
per instructions.
Rinse thoroughly
with clean water and
dry.
Contact customer
service
Contact customer
service
Decrease mist
output using the
On/Off Switch Knob.
Use purified or
distilled water.
Attach your purchase receipt here
PLEASE KEEP YOUR RECEIPT.
YOUR RECEIPT IS YOUR PROOF OF
PURCHASE AND IS NECESSARY FOR
WARRANTY SERVICE.
