FOR YOUR SAFETY
IMPORTANT INSTRUCTIONS
Read and save these important safety instructions before using this unit. When
using electrical appliances, basic safety precautions should always be followed
including the following:
1) Use this unit only as described in this manual. Other uses not recommended
may cause fire or electric shock.
2) This product is intended for household use ONLY and not for commercial,
industrial or outside use.
3) To protect against electrical shock, do not place unit in window, immerse unit,
plug or cord in water, or spray with liquids.
4) Close supervision is necessary when any appliance is used near children.
5) Unplug the unit from the outlet when not in use, when moving from one
location to another and before cleaning.
6) Do not operate the unit in the presence of explosive and/or flammable fumes.
7) Do not place the unit or any parts near an open flame, cooking or other
heating appliance.
8) Do not operate the unit with a damaged cord, plug, after a malfunction or
if dropped or damaged in any manner.
9) Avoid contact with moving parts.
10) To disconnect, grip the plug and pull it from the wall outlet. Never yank
the cord.
11) The use of attachments is not recommended and may cause hazards.
12) Always use on a dry level surface.
13) Do not operate if the unit housing is removed or damaged.
14) This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
15) Do not carry the unit while its operating.
16) Do not add any medications into the water tank or reservoir.
17) Do not aim Mist Nozzle directly at children, walls, or furniture.
18) Do not use hot water or unfiltered tap water. This will cause clogging and
damage to misting parts.
19) Do not place unit in direct sunlight, high-temperature areas, near computers,
or sensitive electronic equipment.
20) FOR INDOOR USE ONLY
WARNING: To reduce the risk of fire or electrical shock, DO NOT USE
THIS UNIT WITH ANY SOLID STATE SPEED CONTROL DEVICE.
MAINTENANCE
Daily Maintenance:
1.Remove the tank cap and drain any water from the water tank. Rinse the
water tank with luke warm water after each use. Wipe accessible surfaces of
the water tank with a soft cloth.
2.Clean the base and reservoir with a soft damp cloth. Use care when wiping
around the Probe Sensor.
3. DO NOT use abrasive cleaners or brushes.
4. DO NOT leave water in the Water Tank when the unit is not in use. This may
result in bacteria growth in the reservoir.
Weekly Maintenance:
1. Thoroughly clean humidifier every week using a solution of bleach and water
(1 teaspoon of bleach in 1 gallon of water). Fill the tank partially with this solu-
tion and let it stand for 20 min. shaking the water tank vigorously every few min-
utes. Drain and rinse the tank with clean water the bleach smell is gone.
2. Wipe reservoir with a damp cloth thoroughly.
3. If mineral deposits are on the Probe Sensor or transducer and are hard to
clean, use a cotton swab that is damped with a solution of 50% white vinegar
and 50% water to gently loosen the buildup on the Transducer. DO NOT touch
the Transducer with your bare hands.
End of Season Maintenance:
1. At the end of the season, or when the humidifier is not in use for several of
days be sure to dry all parts of the unit, including the Water Tank and the
Cartridge.
2. Leave the tank cap partially loosened during storage to prevent the tank cap
and gasket from sticking together.
3. Clean the tank and base after a long period of storage.
Probe
Transducer
Inside Unit
