7.Console Operation
Note:
The console has five keys for easy operation:
MIN/MAX/-
key,
ALARM
key,
SET/MODE
key,
C
and
SNOOZE
key.
7.1 Quick Display Mode
Note:
To exit the Quick Display Mode at any time, press the
SNOOZE
key of the display console.
While in Normal Mode, press (do not hold) the
SET/MODE
key to enter the Quick Display Mode as follows:
once for time, time/week and date,
twice for indoor temperature, dew point,
three for rainfall.
four for outdoor dew point temperature
Five for wind average
Six for pressure
Seven for sensor dew point
1.
Time, Time/Week and Date.
Press the
C or MIN/MAX/-
key to toggle between time,
time/week and date.
2.Indoor Temperature.
Press the
C or MIN/MAX/-
key to toggle between temperature and dew
point
3.
Rainfall.
Press the
C
or
MIN/MAX/-
key to toggle between rate, 24h, week, month and total.
To clear the total rain, press the
C
or
MIN/MAX/-
button until total rain is displayed. The total
rain will flash. Press and hold the
SET
button for five seconds until total rain reads 0.0.
4.
Outdoor Dew Point. Press the C or MIN/MAX/- key to toggle between AT
（
Apparent
Temperature) and dew point.
5.Wind Average.
Press the
C
or
MIN/MAX/-
key to toggle between current,2mins and 10
minutes.
6.
Absolute Pressure and Relative Pressure.
Press the
C
or
MIN/MAX/-
key to toggle between
absolute pressure and relative pressure.
7.Sensor Heat Index.
Press the
C
or
MIN/MAX/-
key to toggle between sensor heat index and
dew point.
7.2 Set (Program) Mode
While in Normal Mode, press
and hold
the
SET(MODE)
key for at least three seconds to enter the Set
Mode. The first setting will begin flashing. You can press the
SET(MODE)
key again to skip any step, as
defined below.
Note:
In the Set mode, press the [+] key or [
-
] key to change or scroll the value. Hold the [+] key or [
-
]
key for three seconds to increase/decrease rapidly.
Note:
To exit the Set mode at any time, press the
SNOOZE
button of the display console.
1.
Time SYNC (default: ON).
Press the SET key again to set the network time sync. Press the [+] key or [-]
key to switch between SYNC time ON and SYNC time OFF.
2.
12/24 Hour Format (default: 24h):
Press the
SET(MODE)
key again to adjust the 12/24 hour format
setting (FMT). Press the [+] key or [
-
] key to change between 12 hour and 24-hour format.
