Wincor Nixdorf TH250, Руководство программиста

Страница: 114 / 182

TH250 Programmer’s Guide
109
Paper type Total memory allocated
(kBytes) Area of construction (mm)
Monochrome paper 40.5 72 wide x 72 high
Two-color (dots) paper 81.0 72 wide x 72 high
72 wide x 72 high (energy)
Printer returns to standard mode through use of 0C, 1B 53, or initialization (which cancels all
settings).
Exceptions
The command is enabled only when input at the beginning of a line. The command has no effect if
page mode has previously been selected.
Select standard mode
ASCII
Hexadecimal
Decimal ESC S
1B 53
27 83
Switches from page mode to standard mode. In switching from page mode to standard mode, data
buffered in page mode are cleared, the printing area set by set print area in page mode (1B 57) is
initialized and the print position is set to the beginning of the line.
This command switches the settings for the following commands (the values for these commands
can be set independently in standard mode and page mode) to those for standard mode:

Set right-side character spacing (1B 20)

Select 1/6-inch line spacing (1B 32)

Set line spacing (1B 33)
Standard mode is automatically selected when power is turned on, the printer is reset, or the
initialize printer command (1B 40) is used.
18, 1B 0C, 1D 24, and 1D 5C commands are ignored in standard mode.
Exceptions
This command is effective only in page mode.
Select print direction in page mode
ASCII
Hexadecimal
Decimal
Value of
n :
EST T n
1B 54 n
27 84 n
Start position
0 = Upper left corner proceeding across page to the right [A]
1 = Lower left corner proceeding up the page [B]
2 = Lower right corner proceeding across page to the left (upside down)
[C]
3 = Upper right corner proceeding down page [D]
Default:
0