Wincor Nixdorf TH230 Скачать руководство пользователя страница 31

Страница: 31 / 293

Programmers Guide

TH230/TH230+

•

- If the printer will print in the remaining printable area of the label, but

the feed amount exceeds the remaining printable area of the label, the

printer prints the label and feeds to bottom of the label.

Reference:

ESC 2, ESC 3, ETB

Function:

(1) Print and return to standard mode (in page mode)

Code ASCII:

Code HEX:

0x0C

Description:

In page mode, prints the data in the print buffer collectively and returns to

standard mode.

Notes:

•

This command is enabled only in page mode.

•

The data is deleted in the printing area after being printed.

•

This command returns the values set by ESC W to the default values.

•

The value set by ESC T is maintained.

•

After printing, the printing position moves to the beginning of the line.

When a left margin is set, the position of the left margin is the beginning

of the line.

Function:

(2) Print and feed marked paper to print starting position

Code ASCII:

Code HEX:

0x0C

Description:

Prints the data in the print buffer and feeds marked paper to the print

starting position.

Notes:

•

If the BM sensor is enabled by using memory switch 0x80 the printer

feeds the marked paper to the next mark position.

•

If the paper is at the print starting position and there is no data in the

print buffer, this command is ignored.

•

If the BM sensor is enabled by using memory switch 0x80 the minimum

foot loss is

5 mm.

•

After printing, the printing position moves to the beginning of the line.

When a left margin is set, the position of the left margin is the beginning

of the line.

Reference:

Memory switch (see page 98)

Содержание TH230






































































































































































































































































































Результаты поиска

Содержание TH230

Отзывы:

Похожие инструкции для TH230

Бренды по названию

Популярные бренды

Wincor Nixdorf TH230, Руководство программиста

Результаты поиска

Содержание TH230

Отзывы:

Похожие инструкции для TH230

Бренды по названию

Популярные бренды