Wincor Nixdorf TH230 Скачать руководство пользователя страница 196

Страница: 196 / 293

TH230/TH230+

Programmers Guide

189

GS 0x82

Function:

Print raster monochrome graphics

Code ASCII:

0x82

n1 … n72

(576 dots, 80 mm paper)

, or n51

(408 dots, 57.5 mm

paper)

Code HEX:

0x1D 0x82

n1 … n72

(576 dots, 80 mm paper)

, or n51

(408 dots, 57.5 mm

paper)

Range:

n72/n51

corresponds to one dot row data for a thermal receipt printer

Description:

Each bit defines whether or not a dot of the current color will be printed.

This command is used for printing a monochrome graphics in real-time.

Offsets, page and any other modes or overlays, including watermark do not

apply and are overwritten by this command. A complete rendering of the

intended final image should have been done by the application before

sending the dot rows.

If two-color paper is indicated by the set paper type command, then the

raster will be printed in the color that is defined by the set current color

command.

Notes:

•

This command is identical to command DC1(see page 31).

GS 0x83

Function:

Print raster color graphics

Code ASCII:

0x83

n1 … n144

(576 dots, 80 mm paper)

, or n102

(408 dots, 57.5

mm paper)

Code HEX:

0x1D 0x83

n1 … n144

(576 dots, 80 mm paper)

, or n102

(408 dots, 57.5

mm paper)

Range:

n144/n102

corresponds to one dot row data

Description:

For each printed dot row starting at the top left, two-part bit strings are used

to define (in the first half), all dots that are of either color (i.e. not white).

The second half string defines only the dots where the color is black.

Thus all dots which are on in the first half string but not on in the second half

string, select the secondary color. The parameter of this command is thus a

string of bytes for one dot row with the same structure as defined for the

thermal color format file given in the download color logo command.

This command is used for printing a single raster of color graphics in real-

time. Offsets, page and any other modes or overlays, including watermark,

and current color do not apply to this command. A complete rendering of the

intended final image has to be done by the application before sending the

dot rows.

Содержание TH230






































































































































































































































































































Результаты поиска

Содержание TH230

Отзывы:

Похожие инструкции для TH230

Бренды по названию

Популярные бренды

Wincor Nixdorf TH230, Руководство программиста

Результаты поиска

Содержание TH230

Отзывы:

Похожие инструкции для TH230

Бренды по названию

Популярные бренды