8
Installation
Unpacking The Microwave &
Countertop Installation
1. Inspect oven for damage, including dents or cracks in the door or
inside the oven cavity.
2. Remove all materials from oven interior.
3. Remove all plastic wrap and packaging material prior to use.
Note:
Do not press the ceramic board forcibly. Take and put
items gently during the operation in order to avoid damage the
ceramic board. After using, do not touch the ceramic board in
order to avoid burns.
4. DO NOT install next to or above a source of heat (such as oven or
fryer). This could cause microwave oven to operate improperly and
could shorten the life of the electrical parts.
5. Install the oven on a level countertop surface.
Note:
DO NOT install next to radios or TVs. Operation
of microwave may cause interference.
Note:
See Fig. 1 for clearance requirements. Never dismantle the
appliance's feet, nor block the air intake and exhaust opening.
6. Outlet should be located so that the plug is accessible when the
oven is in place.
•
Plug oven into receptacle that matches the voltage and frequency
on the ovens rating plate.
Stacking Microwaves
IMPORTANT
Do not stack more than 2 (two) microwaves.
1. Remove installation plate on microwaves and reinstall screws.
2. Remove the screws located on the sides of microwave.
3. Align the installation plates and connect the two units with
screws removed in Step 2.
Top
12" (30cm)
Fig. 1 - Clearance requirements
Fig. 2 -Stacking two microwaves
Left
KEEP OPEN
Right
4" (10cm)
1
2
3
Back
4" (10cm)
