14
Care & Cleaning Instructions
Cleaning the mixer and mixer cover
Clean the mixer cover regularly to prevent debris from falling onto food.
1. Remove mixer cover by pressing on the two openings and pulling
down slightly.
2. Clean the mixer and mixer cover of food or grease build-up.
3. To reinstall, align the 3 pegs on cover to the holes in the
microwave back interior. Lift the cover and push until mixer cover
is secured to microwave.
Cleaning the filter
Clean the filter regularly to prevent unit from over heating.
1. Remove screws and filter.
2. Clean and reinstall.
Fig. 3 - How to remove and install mixer cover
Fig. 4 - How to remove and install filter
Cleaning glass view window, inner door panel,
and oven front face
For best performance and to maintain the high degree of safety, the
inner door panel and oven front face should be free of food or grease
build-up. Wipe these parts with a mild detergent, rinse and wipe dry.
Never use abrasive powders or pads.
Cleaning the control panel and plastic parts
Do not apply a detergent or an alkaline liquid spray to the control
panel and plastic parts, as this may cause damage to these parts.
Use a dry cloth (not a soaked cloth) to clean these parts.
Cleaning the oven interior
After using be sure to clean up spilled liquids, spattered oil and food
debris as quickly as possible. If the oven is used when dirty, food
debris may stick onto the oven surface and cause bad odors. Clean the
interior with a cloth soaked in lukewarm water with a mild detergent
dissolved in it, then rinse the soap off with a damp cloth.
IMPORTANT
•
DO NOT use abrasive cleansers or cleaners containing ammonia or
citrus. These can damage the finish.
•
NEVER pour water into microwave oven bottom.
•
DO NOT use water pressure type cleaning systems.
•
DO NOT wipe plastic and painted sections of the oven with bleach,
thinners or other cleaning agents, as this may cause these parts
to dissolve or distort/change shape.
Press here
WARNING
TO AVOID ELECTRICAL SHOCK, WHICH CAN CAUSE SEVERE
PERSONAL INJURY OR DEATH, UNPLUG POWER CORD OR OPEN
CIRCUIT BREAKER TO OVEN BEFORE CLEANING OR REMOVING
LIGHT BULB. DO NOT POWER SPRAY, AND DO NOT USE METAL
PANS.
ALWAYS KEEP THE OVEN CLEAN.
