11
Operation
8. END OF COOK CYCLE MODE
a. After time has expired in Manual Cook Mode or a Preset Program Cook Mode, the oven will enter into the End of Cook Cycle Mode.
b. During this mode, “DONE” displays on the screen.
c. If either User Option "OP:11" or "OP:12" is selected, the oven will continue to sound until the user acknowledges by either opening and
closing the door or pressing the
[STOP]
key. If User Option "OP:10" is selected, after the 3-second beep, the oven will display "DONE". After
the beep, the oven will display "READY". The oven will enter Idle Mode without any operation after a period of time.
9. PRESET PROGRAM COOK MODE
a. This mode allows for cooking of food items through a one pad touch operation. While in Ready Mode, pressing one of the ten-digit keys on
the keyboard will cause the oven to run the Preset Program associated with that key.
b. The screen will display the remaining cooking time. If it is multi-stage cooking, the total remaining cooking time will display, not a particular
stage cooking time.
c. When the cooking program finishes, the oven will enter End of Cook Cycle Mode. If the user presses the
[STOP]
button while in this mode,
the oven will enter Pause Mode.
10. ON-THE-FLY COOKING
a. While the oven is operating, if User Option "OP:51" is selected, pressing a Number Key will automatically start the preset cooking program
associated with the selected number key.
b. The screen will display the remaining cooking time.
c. When the cooking program completes, the oven will enter End of Cook Cycle Mode.
11. PROGRAMMING MODE
This mode allows the user to assign cooking times and power levels to the keypad number keys. Note: Set the time first, then choose the power.
a. Open the door and press the Number 1 key for 5 seconds. The buzzer will sound once to indicate Programming Mode has been activated.
b. The screen will display “PROGRAM” and new desired time can be inputted.
c. Press
[Hold 0%], [Defrost 20%], [Medium 50%],
or
[Med-Hi 70%]
to input the power level. The screen will display the related power. If
the same button is pressed twice, the power will change to PL10. If no power is chosen, PL10 serves as the default.
d. If
[X2]
is pressed, the screen will display “CF:80”, default factor of 80%. To change cooking factor, press desired number key for new factor.
e. After setting the time and power, press
[START]
to save the cooking program. The screen display will show “PROGRAM”.
f. If the total cooking time entered exceeds the maximum time allowed in User Option 7, when the
[START]
key is pressed to save the
program, the buzzer will sound three times briefly, and the screen will display “PROGRAM” to indicate that the program is unacceptable.
g. Close the door and the oven will return to Ready Mode. Pressing the
[STOP]
button during the setting process will turn the oven to Door
Open Mode. Programs not saved will be lost.
Programming Example:
Power level PL7 and cooking time is 1 minute and 25 seconds.
Step 1:
Open the oven door and press Number Key “1” for 5 seconds. The screen will display “PROGRAM”.
Step 2:
Press Number Key “3”, the screen will display "P:03". After two seconds, the screen will display the related time " :30".
Step 3:
Press the Number Keys “1”, “2”, and “5” to input the cooking time.
Step 4:
Press the
[Med-Hi 70%]
button; “1:25 70” will display. Setting is complete.
Step 5:
Press
[START]
to save. When the program is used the next time, only pressing “3” will start the related program will.
Notes:
1. If the electricity supply is interrupted, the saved programs will not be lost.
2. If the program need to reset , just repeat the above steps.
3. Pressing
[STOP]
returns the oven to the Door Open Mode and cancels the entered settings.