OPERATING INSTRUCTIONS
LINAK BATTERY & CONTROL BOX INSTRUCTIONS
• To charge battery BE SURE the emergency stop is
in the "OUT" position.
*Battery WILL NOT charge if the emergency
stop is engaged.
• Keep patients away from Stretchair while it's
charging.
• Battery MUST BE fully charged prior to FIRST use.
• Without a battery back-up DO NOT allow chair to
run with less than a 50% charge.
• Battery cannot be over-charged using the charging
unit provided and the instructions given.
Battery Installation
1. Locate the battery bracket and control box
positioned on the back side of the chair frame.
(FIG. 10)
2. Align the battery guides
(FIG. 11B)
with battery
bracket and slide the battery connectors
(FIG. 11C)
into the control box.
3. Push opposite end of battery in and ensure that the
battery release handle
(FIG. 11A)
locks into place.
(FIG. 12)
Removal of Battery
1. While holding the battery with both hands, pull the
battery release handle.
(FIG. 11A)
2. Slide the battery to the left and then out.
Battery LED Indicators
•
A plug-in indicator appears while the battery is
charging.
(FIG. 13)
•
Once the battery is fully charged a battery meter
will appear.
(FIG. 14)
FIG. 10
FIG. 11
FIG. 12
FIG. 13
FIG. 14
IN CASE OF EMERGENCY
• Push the RED emergency button to stop ALL electrical operations
• When activated a STOP and PLUG-IN icon will appear (FIG. 4)
• To continue operation twist the RED button clockwise
14
