Winco 6530, Руководство владельца по эксплуатации и обслуживанию

Страница: 13 / 24

RAISE / LOWER DROP-ARMS
(FIG. 1)
(For Drop-Arm Care Cliner Models ONLY)
BEFORE RAISING OR LOWERING, VERIFY THAT OCCUPANT
AND ATTENDANT ARE CLEAR OF DROP-ARM.
1. To Lower: Grasp armrest in center; use free hand to LIFT the
drop-arm release handle. The drop-arm will disengage and
you can then lower it to the fully dropped position
(FIG. 1).
2. To Raise: Firmly pull straight up in the center of the armrest.
Make sure both armrests are locked into place before
attending the occupant.
NOTE: Periodically lubricate the channels of the drop
arms with facility approved silicone base lubricant to keep
the parts moving freely.
DO NOT raise and lower drop-arms with tables in an upright
position (Drop-Arm Care Cliner Models ONLY ).
SIDE PANEL - REMOVAL / REPLACEMENT
(For Care Cliner Models ONLY )
1. For ease of cleaning and chair maintenance, use a phillips
screwdriver to unscrew two (2) screws at the front of chair
and one (1) screw at the rear of chair, on the inside of each
panel (FIG. 2).
2. Replace panel and reinstall three (3) screws (FIG. 2) when
cleaning or maintenance of chair is complete.
DROP-ARM VINYL PANEL
(For Drop-Arm Care Cliner Models ONLY )
1. The vinyl panel is secured to the bottom of the drop-arm with
a hook and loop fastener material. Peel hook and loop apart to
allow ease of cleaning and access behind the drop-arm of the
chair
(FIG. 3 and 4).
2. Reattach the panel by aligning and firmly pressing the hook
and loop material back together.
Fig. 3
Fig. 4
Fig. 2
Fig. 1
Page 13 of 24
Document No.: 006120
Revision: AC
Owners Operating & Maintenance Manual:
Care Cliner Collection
Owners Operating & Maintenance Manual:
Care Cliner Collection