Winco 653 Скачать руководство пользователя страница 4

3

IMPORTANT - PLEASE READ

 

DO NOT LIFT OR CHANGE CHAIR POSITION BY USING THE LEGREST.

THIS COULD CAUSE INJURY TO USER OR DAMAGE TO THE RECLINE 

MECHANISM AND WILL VOID WARRANTY.

ALWAYS CHANGE POSITION FROM BACK OF CHAIR.

1.  READ AND FOLLOW ALL DIRECTIONS.
2.  Keep children away from extended foot support (or other similiar parts).
3.  DO NOT put hands, feet or clothing into any openings when changing positions on recliner.   
     Attendant MUST confirm that users arms, legs, hands and feet are safe while changing recliner   
     positions or SERIOUS INJURY MAY RESULT.
4.  Lock casters at all times, except when transporting chair.
5.  STAY CLEAR of the recliner mechanisms.
6.  DO NOT use recliner for transporting in or with ANY type of vehicle or trailer. Winco recliners  
     have not been tested or approved for use by an occupant in any type of vehicle or trailer.
7.  NEVER use the chair arms or backrest as a seat; SERIOUS INJURY or damage may occur.
8.  Periodically check the tightness of all nuts, bolts and screws.
9.  Immediately REMOVE FROM SERVICE; Any recliner with broken recline
     mechanisms, torn upholstery, or other mechanical or visible damage.
10.  NEVER transport user with chair arms in an "open or down" position. 

Applies to Drop-Arm &   

     Swing-Arm models.

11. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.

12. NEVER EXCEED the recommended weight capacity - see pages 7-8.

      GROUNDING INSTRUCTIONS:

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least 
resistance for electric current to reduce the risk of electric shock.  This product is equipped with a cord 
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric 
shock. Check with a qualifi ed electrician or serviceman if you are in doubt as to whether the product is 
properly grounded. Do not modify the plug provided with the product - if it will not fi t the outlet, have a 
proper outlet installed by a qualifi ed electrician.

This product is for use on a nominal 120-volt circuit and has a grounding plug.  Make sure that the product 
is connected to an outlet having the same confi guration as the plug.  No adapter should be used with this 
product.

For an added level of safety; Winco recommends the use of a 120 volt GFCI (ground fault circuit
interruptor) outlet.

Содержание 653

















Отзывы: