OPERATING INSTRUCTIONS (cont'd)
FIG. 1
HEAT & MASSAGE OPTIONS
Control is located on the inside of right arm of chair.
Heating:
Push the pivoting (
momentary contact
) switch UP (X = times):
1X
= High Heat;
2X
= Medium Heat;
3X
= Low Heat;
4X
= HEAT OFF
Heat will automatically shut off after approximately 60 minutes
Massage (optional):
Push the pivoting (
momentary contact
) switch DOWN (X = times):
1X
= Lower Back / Low Intensity;
2X
= Lower Back / High Intensity;
3X
= Upper Back / Low Intensity;
4X
= Upper & Lower Back / High Intensity
5X
= MASSAGE OFF
Massage will automatically shut off after approximately 15 minutes
Once you set the temperature; Push switch downward for your massage setting.
Use a DAMP CLOTH ONLY to clean switch, wiring or power pack (located under seat frame).
If there is no heat or massage or flashing light on switch - check power cord connections to wall
outlet AND connection of power cord to power pack unit under chair.
If switch displays a flashing light; Check all accessible wire connectors under chair for possible
loose connections, then contact Winco customer service: 1-800-237-3377.
•
•
•
•
Allow 1-3 minutes to feel a gradual warming once switch is pushed upward.
Massage will start instantly when switch is pushed downward.
12
CORD STORAGE
(Models with Heat or Massage only)
1. Before transporting chair, or when heat & massage is
not in use, power cord should be coiled and stored in
the "Hook & Loop" fastener provided as shown, to
prevent tripping on cord, damage to cord, damage to
recliner, etc...
(FIG. 1)
