background image

60706-198  1004-00

225 South Cordova Avenue
Le Center, Minnesota  56057
1-800-733-2112 / 507-357-6821

WINCO PTO GENERATORS

36 MONTH LIMITED WARRANTY

WINCO, Inc., warrants for thirty-six  months from date of shipment, that it will repair or replace at its
option, for the original user, the whole or any part of the product found upon examination, by WINCO
at its factory at 225 South Cordova Avenue, Le Center, Minnesota,  or by any factory-authorized
service station, to be defective in material or workmanship under normal standby use (average less
than 50 hours per month) and service.

For warranty service, return the product within 36 months from  the date of purchase,  transportation
charges prepaid, to your nearest factory-authorized service station or the WINCO factory.

There is no other express warranty.  To the extent permitted by  law, any and all warranties, including
those of merchantability and fitness for a particular purpose, are limited to 36 months from date of
shipment, and liability for incidental or consequential damages or expenses is excluded. Some
states do not allow limitations on the duration of an implied warranty, and some states do not allow
the exclusion or limitation of incidental or consequential damages, so that above limitation or
exclusion  may  not apply to you.  This warranty  gives you specific legal rights;  you may have other
rights which vary from state to state.

This warranty is limited to bench labor and parts only, no allowance will be made for travel time, or
removal and reinstallation of the PTO unit.

WINCO does not warrant drive lines, trailer tires, receptacles, or certain other component parts of
the product installed by others, since such items are warranted by their manufacturers.

WINCO does not warrant modifications or alterations which were not made or authorized by the
WINCO factory and which affect the stability or reliability of the product.

WINCO does not warrant products which have been exposed to misuse and/or negligence or have
been involved in an accident.

WINCO does not warrant products which have been installed in such a manner as not to protect them
from the adverse environmental conditions (water, mud, insects, etc.) or have not been kept clean.

WINCO reserves the right to change or improve its products without incurring any obligations to
make such  changes or improvements on products purchased previously.

Содержание 35PTOC-3













Отзывы: