WC-control
SanTec OCEAN T6
17
EN
OCEAN T6
Congratulations on purchasing your WC control
SanTec OCEAN T6.
In order to ensure that you will be able to enjoy this high-qua-
lity product for many years, please take note of the following
cleaning and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, nano sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners.
This manual is valid for the following products:
SanTec OCEAN T6 12 V SLK
Glass white
Art.No. 109 948
Glass black
Art.No. 114 591
SanTec OCEAN T6 12 V UP 320
Glass white
Art.No. 110 081
Glass black
Art.No. 114 607
Delivery scope:
Glass front plate with frame, mounting frame with integrated
electronics, bearing block with motor lifter and 6 V Lithium
batteries.
Important installation notes:
Provide for a flush-mount box for an optional power supply
outside of the protected zone. Mounting and installation may
only be performed by a qualified service provider in accordance
with DIN 1988, ÖVE/ÖNORM E8001 and VDE 0100 Part 701.
When planning and installing sanitary facilities, all relevant
local, national and inter-national standards and provisions must
be observed!
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!
