E-Module setting
GB
Green LED light up when the connected sensor is active.
This LED also flashes in setting mode.
Green LED is always lit up for the corresponding setting
selected (urinal, washbasin or WC).
Red LED lights up by short circuit or electrical fault on the
solenoid valve resp. (Mechanical fault of the SV’s is not
displayed).
Green LED lights up when switching of the solenoid valve -
flushing - is effected.
LED line
Sensors
LED line
Solenoid
valves
LED line
Sensor
setting
Diagnostics function of the individual LED’s
With faults and power failures, a brief triggering of the
GLT-contact takes place (break contact 24 V / max. 20 mA).
For analysis on a building-management system.
Diagnostics
connection
for GLT
1
1
2
2
3
3
4
4
5
5
21