WimTec NSIDE, Инструкция по установке и эксплуатации

Страница: 15 / 24

Urinal control WimTec INSIDE 15
EN
INSIDE
Assembly
ATTENTION!
Following steps must be
done in order as described
necessarily!
!
2
5
1
4
3
1. Execute pre-flush with flush piece and tube.
2. Close shut-off valve. Insert dirt filter. Shut down water and power supply.
ATTENTION! Do not restore water supply until mounting of control and ceramics are com-
pletely finished.
3. Insert magnetic valve and fictions according to illustration.
ATTENTION! Mind flow direction of the magnetic valve.
4. Open shut-off valve (keep water supply shut down).
5. Adjust sensor siphon length to outlet.