WimTec NSIDE, Инструкция по установке и эксплуатации

Страница: 13 / 24

Urinal control WimTec INSIDE 13
EN
INSIDE
Technical specifications
Operating voltage: 230 V 50 Hz
Power consumption: ca. 3 VA
Magnetic valve:
1/2“ 24 V 50 Hz
Main flushing: from 1 s to 10 s
Stadium mode: from 3 usages within 1,5 min flushing will be exexuted every minute
Stagnation rinse: activatable, after 3h or 24 h of none usage
Dry-out protection: for odor trap restoration
Flow pressure:
0,05 - 0,6 MPa (0,5 - 6 bar)
Flow rate: ca. 0,3 - ca. 0,7 l/s at 0,3 MPa (3 bar) according to EN 12541 reduceable
Urinals: For urinals with a level urinal outlet at the back. Urinals with avertical
siphon e.g. Laufen Taro Nova only with siphon adaptor (Art.Nr. 231 311)
Installation note: To avoid rinsing out of cleaning agents inside the cermic a central
water shut-of resp. power off for the urinals should be provided
on site.
Installation dimensions
All dimensions in cm
51,5
Finished
floor level
Structural
floor level
65 (adults)
115 (Lauf
en Caprino)
115 (Lauf
en T
ar
o No
va)
0
-2
5
Inlet
DN 15
Outlet
DN 50
Sensor siphon
Control electronics and
valve unit are installed
behind the ceramics
10-17,5