1-6
OPTIONS
The following options are available.
Option 1, Rack Mounting. Rack mount kit containing a set of
track slides (90
°
tilt capability), mounting ears, and front panel
handles for mounting the instrument in a standard 19-inch equip-
ment rack.
Option 2A, 110 dB Step Attenuator. Adds a 10 dB per step
attenuator with a 110 dB range for models having a high-end fre-
quency of
≤
26.5 GHz. Output power is selected directly in dBm on
the front panel (or via GPIB). Rated RF output power is reduced.
Option 2B, 110 dB Step Attenuator. Adds a 10 dB per step
attenuator with a 110 dB range for models having a high-end fre-
quency of
≤
40 GHz. Output power is selected directly in dBm on
the front panel (or via GPIB). Rated RF output power is reduced.
Option 9K, Rear Panel RF Output. Adds an RF output connec-
tor (K-Connector ®, female) to the rear panel and deletes the RF
output connector on the front panel.
Option 11, 0.1 Hz Frequency Resolution. Provides frequency
resolution of 0.1 Hz.
Option 14,
WILTRON
360B VNA Compatibility. Modifies rack
mounting hardware to mate unit in a
WILTRON
360B VNA con-
sole.
Option 15, High Power Output. Adds high-power RF compo-
nents to the instrument providing 50 mW RF output power in the
2–26.5 GHz frequency range.
Option 16, High-Stability Time Base. Adds an ovenized,
10 MHz crystal oscillator with <5 x 10
–10
/day frequency stability.
Option 17, No Front Panel. Deletes the front panel for use in
remote control applications where a front panel display or key-
board control are not needed.
Option 19, SCPI Programmability. Adds GPIB command mne-
monics complying with Standard Commands for Programmable
Instruments (SCPI), Version 1993.0. SCPI programming complies
with IEEE 488.2-1987.
1-7
PERFORMANCE
SPECIFICATIONS
Series 681XXB Synthesized Sweep Generator performance specifica-
tions are provided in Appendix B.
K Connector ® is a registered trademark of WILTRON Company.
GENERAL
INFORMATION
OPTIONS
1-6
681XXB OM