© by WilTec Wildanger Technik GmbH
Seite 3
http://www.wiltec.info
Safety instructions
PRECAUTION
:
On standing waters, garden ponds, swimming ponds as well as their surrounding areas you have to
use the device only with a residual current circuit breaker with a triggering nominal current up to 30
mA (according to VDE 0100 part 702 and 738).
The device is not suitable for the use in swimming pools, in any kind of paddle pools or any other wa-
ters during the operation of which there are humans or animals. The commissioning of the device dur-
ing the stay of humans or animals in the danger zone is not allowed. Ask your electrician!
This device must not be used by persons (including children) with reduced physical, sensory or mental
capabilities, or with a lack of experience and/or knowledge, unless they are supervised by a person
responsible for their safety or have been given instructions concerning the use of the device.
Children should be supervised to ensure that they do not play with the device.
ATTENTION
:
Perform a visual inspection of the device before each use. Do not use the device if the safety
equipment is damaged or worn. Never put the safety equipment out of force.
Use the device only for the purpose as specified in this manual.
You are responsible for the safety in the work area.
If the power cord or the plug is damaged by external influences, the cord must not be repaired!
Since the cord is molded with the stator, a replacement is not possible, the pump has to be
scrapped.
The specified unit voltage of 230 volts AC as indicated on the nameplate has to match the ex-
isting mains voltage.
Never lift, transport or attach the device by the power cord.
Make sure that the electrical connectors are located in a flood-safe area and that they are pro-
tected against moisture.
Pull power plug before working on the device.
The operator is responsible for the compliance with the local safety and installation regula-
tions.
The user has to exclude, by taking the appropriate measures (e.g. installation of an alarm sys-
tem, reserve pump or the like), any consequential damage due to flooding of areas and faults
in the device.
If there is a failure of the device the repairing is only to be done by a professional electrician or
by Wiltec Customer Service.
The device must never run dry or be operated with fully closed suction pipe. For the damage
in the device caused by a dry run the manufacturer´s warranty will be void.
The device must not be used for the operation in swimming pools.
The device must not be installed in the portable water circulation.
WARNING
:
Read all safety instructions!
Failure concerning the warnings and instructions may result in electric shock, fire and/or serious injury.
Keep all warnings and instructions for the future.