WilTec 62138, Руководство по эксплуатации, Страница: 7 / 13

© by WilTec Wildanger Technik GmbH Item 62138, 62139 Page 7
http://www.WilTec.de
http://www.aoyue.eu 06 2021 -1
http://www.teichtip.de
•
This mechanism is simple and the unit is made of high-quality materials. The function is based
on a proven concept.
•
The lifting unit consists of a housing with a built-in pump which automatically drains acidic, fatty
and hot water (up to 80
℃
), faeces and toilet paper via a pipe with a diameter of 23 mm, 28 mm,
32 mm or 44 mm to the next sewage system.
•
They are designed to collect waste water from sanitary installations in bathrooms (EN-12050-3,
EN-12050-4) or kitchens, including washing machines, dishwashers and all other appliances
whose waste water is to be disposed of (see curve diagram).
•
The non-return valve included in the packaging must be installed.
•
The standard EN-12050-3, EN-12050-4 stipulates that if a WC is connected, only a shower, a
bidet and a washbasin can be connected, too.
•
The lifting unit cannot be installed on appliances such as washing machines and dishwashers
if it is connected to the toilet.
•
In the event that the water flow in the tank cannot be interrupted during normal operation, a
device with the same capability must be used which will automatically switch on if necessary.
•
The installation must comply with the European standard EN 12056-4.
•
Fix the container with two plugs (
⌀
3.5 mm) or a similar device using the fixing holes provided.
•
The lifting unit can be connected to any toilet model with a wall drain according to European
regulations.
•
It is fixed by inserting the WC drain into the rubber sleeve which comes out of the housing and
screwing the supplied clamp.