WilTec 62138, Руководство по эксплуатации, Страница: 6 / 13

© by WilTec Wildanger Technik GmbH Item 62138, 62139 Page 6
http://www.WilTec.de
http://www.aoyue.eu 06 2021 -1
http://www.teichtip.de
Resistance
•
In order to ensure a long service life, only organic toilet waste water, water and paper should
be disposed of with the lifting unit.
•
The maximum temperature of the pumped liquid should not exceed 80
℃
during operation.
•
No flammable, gassing, or explosive liquids may be pumped with this pump. This pump must
not be used for other liquids, in particular motor fuels, cleaning agents and other chemical prod-
ucts!
Important: Toilet paper, urine and faeces are the only substances that belong in a toilet.
Everything else belongs in the garbage can!
Please note that the waste water can only be pumped
into the lifting unit without pressure.
Note: Some of the accessories included in the delivery are located
inside the lifting unit. Please remove the accessory bag
before installation.
Installation
•
The lifting unit will be installed according to EN-12056-4.
•
The lifting unit can be operated at any commercially available toilet with a horizontal outlet.
According to the EU standard, the centre of the horizontal outlet must be 18 cm above the floor
(shell: 18 cm above FFB).
•
Important: PRESSURE-LESS: When connecting a washing machine to the lifting unit, the
waste water hose must not be connected directly to the lifting unit, but must be supplied via a
vented pipe system (e.g., via a washbasin which can be slowly introduced into the unit). In case
of direct connection, the collecting tank of the lifting unit may burst, and this is
not a warranty
case.
•
We recommend that assembly and leak testing be carried out by qualified personnel. Please
observe the legal regulations!
ATTENTION:
During installation, make sure that the pump is not freely suspended from the discharge line or power
cable.
Operating principle
•
The lifting unit consists of a tank which collects the waste water and an electric pump which is
automatically controlled by a pressure switch
(D).
•
The pumping function is activated when the flush is activated, just like a normal toilet.
•
The materials to be conveyed are collected in the container (A). The air chamber (B) measures
the air pressure flowing through the pipe (C) to actuate the pressure switch (D). The pressure
switch starts the engine (E) that drives the turbine/shredder (F). The waste water is conveyed
away through the outlet (G).