© by WilTec Wildanger Technik GmbH
Item 51726
Page 3
12 2021-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•
When using tools, make sure to obey all sanitary and safety regulations, local regulations, and
general work regulations.
•
Keep the device in a dry and clean condition to allow the best and safest possible operation. Do
not use the device if there is any damage visible.
•
If necessary, ensure that the vehicle to be worked on is sufficiently supported with axle stands,
ramps, and chocks.
•
Warning!
Select neutral gear (or “Park” with automatic transmission) and keep your hands away
from the engine, as it might rotate during use of the tool.
The ignition must be turned off!
•
Warning!
Turn the regulator knob fully anti-clockwise before connecting the device to the com-
pressed air supply.
•
Too high a pressure can damage to gauge.
•
During work, wear appropriate protective equipment (eye protection, work shoes, etc.). Avoid
wearing wide clothes and jewellery and securely tie long hair together.
•
Store all tools and components used in a save place and do not leave them in, on, or near then
engine.
•
Important!
Refer to the vehicle manufacturer’s service instructions or propriety manual to es-
tablish the proper procedure and data. The instructions of the user’s manual present are pro-
vided as guideline only.
№
Name/explanation
№
Name
1
Quick coupling
5
Regulator
2
Water separator
6
Nipple
3
Air supply
7
Recoil hose
4
Drain daily!