WilTec 51362, Инструкция по эксплуатации

Страница: 3 / 5

© by WilTec Wildanger Technik GmbH Item 51362 Page 3
http://www.WilTec.de
http://www.aoyue.eu 09 2021 -1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Use
Intended use
Use the pressure regulator for compressed or liquefied gases discharged under pressure. The pressure
reducer reduces intake pressures of up to 200 bar to the desired pressure value, maintaining it constant.
Thus, the pre-set flow rate is ensured.
Improper use
•
Do not use the pressure regulator with gases in liquid state.
•
Do not use unstable or corrosive gases.
Safety instructions
•
The pressure regulator for gas cylinders must not be changed or modified.
•
No adaptors may be used between the gas cylinder valve and pressure regulator.
•
If operated or used improperly, the device can cause dangers to the user and other persons
and damages to the device.
•
The local prescriptions with regard to the proper use of the device must be obeyed.
•
All parts coming into contact with oxygen must stay free of oil and grease. Fire and
explosion hazard!
•
Smoking or open flames near any gas supply system is strictly forbidden. Fire and
explosion hazard!
•
Always open the valve slowly.
•
The pressure regulator must not be exposed to temperatures beneath
–30 ℃
or above +60
℃
.
•
The gas cylinder must be protected from downfalls.
Attention! Obey the warning precautions found on the stickers on the device!