Wilson Trailer GOOSENECK LIVESTOCK, Руководство пользователя

Страница: 28 / 80

- 28 -
Inspection Procedure Before Trip
Gates
Before traveling, be sure that all divide
gates are locked in either a fully open
or fully closed position. All roll-up gates
must be closed and ropes secured.
CAUTION
Make certain rollup, swing and
half slide gates at the rearend
are closed while trailer is being
operated or parked.
(AAA06462CD) (Rev. 1-02)
Wheels and Rims
Check all wheel nuts for the
proper torque after the first
50 to 100 miles of service and
before each succeeding trip.
Refer to the torque requirements
for the correct procedure and
specifications if necessary.
Check all metal surfaces thoroughly while making tire inspections and
during tire changes and look for cracks or distortions in the wheel studs.
Do not move the trailer when any of these conditions exist. If your axles
are equipped with oil lubricated hubs, check the oil level and fill to the
required level indicated on the oil cap if necessary.
(Rev. 3-93)
WARNING
Check wheel nuts after initial 50 to 100 miles of service. See
Owner’s manual for correct torque requirements. Failure to
do so may result in equipment damage and personal injury.
(AAA06891C)
Insufficient mounting torque can cause wheel shimmy,
resulting in damage to parts and extreme tire wear.
Excessive mounting torque can cause studs and capnuts to
break and discs to crack in stud hole area.