WILSON PRO PRO 1000C, Руководство пользователя

Страница: 42 / 44

IN-BUILDING CELL SIGNAL AMPLIFIER WITH REMOTE MONITORING
PRO 1000C
40
Product Number 460042
Model Number 460042
FCC ID PWO460042
IC ID 4726A-460042
Connectors N-F emale
Antenna Impedance 50 Ohms
Frequency 698-716 MHz, 729-756 MHz, 777-787 MHz, 824-894 MHz, 1850-1990 MHz, 1710-1755/2110-2155 MHz
Power output for single cell
phone (Uplink) dBm 700
MHz
Band12/17 700
MHz
Band13 800
MHz
1700
MHz
1900
MHz
20.9 22.9 22.70 24.30 21.70
Power output for single cell
phone (Downlink) dBm 700
MHz
Band12/17 700
MHz
Band13 800
MHz
2100
MHz
1900
MHz
16.7 15.0 16.0 16.4 15.5
Noise Figure 5 dB nominal
Isolation > 90 dB
Power Requirements 120V AC 0.5A
The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations were met.
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be
adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter
incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster
is not in use for fi ve minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency
band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that
band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1
minute. After 5 (fi ve) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster
has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity
are maintained by the Signal Booster’s microprocessor.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifi cations not expressly approved by weBoost could void the authority to operate
this equipment.
Specifi cations