PRO 1000C
IN-BUILDING CELL SIGNAL AMPLIFIER WITH REMOTE MONITORING
31
If you need to modify the amplifi er communication settings, this utility was created to
help you. The default setting is
Ethernet Preferred
(gives priority to Ethernet, but will
switch to LTE if Ethernet is not connected).
NOTE: It is only necessary to use this utility if you wish to CHANGE a communication
setting. The default setting of Ethernet preferred, LTE backup, is almost always the
best setting to use.
Cat 5/6 cable
If the Installer/Integrator wishes to
change this setting, a laptop computer
must be connected to the Pro 1000C
via a Cat 5/6 cable to the Ethernet
port on the amplifi er.
After connecting, the network icon on
the amplifi er will change color from red
to yellow after about one minute.
Local Ethernet
Confi guration Utility
