IN-BUILDING CELL SIGNAL AMPLIFIER WITH REMOTE MONITORING
PRO 1000C
38
Warnings
To uphold compliance with network protection standards, all active cellular devices must maintain at
least 6 feet of separation distance from Panel and Dome antennas.
Use only the power supply provided in this package. Use of a non-Wilson Electronics product may
damage your equipment.
The Signal Amplifi er unit is designed for use in an indoor, temperature-controlled environment
(less than 100 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to
temperatures in excess of that range.
RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
AWS Warning: The Outside Antenna must be installed no higher than 10 meters (31’9”) above ground.
FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL AMPLIFIER WITH YOUR
WIRELESS PROVIDER, PLEASE SEE BELOW:
Sprint:
http://www.sprint.com/legal/fcc_boosters.html
T-Mobile/MetroPCS:
https://support.t-mobile.com/docs/DOC-9827
Verizon Wireless:
http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html
AT&T:
https://securec45.securewebsession.com/attsignalbooster.com/
U.S. Cellular:
http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
This is a CONSUMER device.
BEFORE USE
, you
MUST REGISTER THIS DEVICE
with your wireless provider and have your
provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers
may not consent to the use of this device on their network. If you are unsure, contact your
provider.
In Canada,
BEFORE USE
you must meet all requirements set out in ISED CPC-2-1-05.
You
MUST
operate this device with approved antennas and cables as specifi ed by the
manufacturer. Antennas
MUST
be installed at least 20 cm (8 inches) from (i.e.,
MUST NOT
be
installed within 20 cm of) any person.
You
MUST
cease operating this device immediately if requested by the FCC (or ISED in Canada)
or licensed wireless service provider.
WARNING
. E911 location information may not be provided or may be inaccurate for calls served by
using this device.
This device may be operated
ONLY
in a fi xed location (i.e..may operate in a fi xed location only) for
in-building use.
ISED CPC-2-1-05:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html
Safety Guidelines
