2
Installation Instructions for the Following Wilson Ampli
fi
er:
SIGNALBOOST MINI-AMP Dual-Band Wireless Ampli
fi
er
Part # 801230
Model #271230
FCC ID: PWO271230SA
IC:4726A-271230SA
The term “IC” before the radio certi
fi
cation number only signi
fi
es that Industry Canada
technical speci
fi
cations were met.
Inside this Package
How it Works
Your new Wilson ampli
fi
er has been carefully engineered to signi
fi
cantly improve the
performance of your cell phone or cellular data card in mobile applications. Together with an
outside antenna, the ampli
fi
er’s state-of-the-art technology is designed to increase your signal
up to 10 times, reduce disconnects and dropouts, and increase data communication rates
needed for 3G technologies.
The outside antenna will collect the cell tower signal and send it through the cable to the
ampli
fi
er. The signal is then boosted and sent through the Ultra-slim inside antenna. Your
cell phone or data card then communicates with the improved signal. When the cell phone
or data card transmits, the signal goes through the inside antenna, is boosted by the
ampli
fi
er and broadcast back to the cell tower through the outside antenna. The Ultra-slim
antenna may also be attached directly to a laptop or cellular data card for maximum signal
performance.
Wilson Electronics manufactures a wide variety of antennas to help you customize your
ampli
fi
er for your speci
fi
c application. Several are shown below. See your dealer or visit
www.wilsonelectronics.com.
Wireless
ampli
fi
er
NMO
Mount
Dual-Band
Magnet
Mount
Dual-Band
Trucker
Mount
Dual-Band
Mini
Magnet
Dual-Band
Marine
Antenna
Dual-Band
NOTE:
Use of this ampli
fi
er with an
antenna gain higher than 6.12 dBi is in
violation of FCC regulations for which the
offender is fully liable. All Wilson mobile
antennas are 6.12 dBi or less.
Ultra-slim
antenna
DC plug-in
power supply
Amplifier Instructions - SBoostMSec1:2 Sec1:2
Amplifier Instructions - SBoostMSec1:2 Sec1:2
4/2/2008 9:16:47 AM
4/2/2008 9:16:47 AM
