WILSON AUDIO Sasha DAW, Руководство по установке и эксплуатации

Страница: 14 / 27

26
Sa sha DAW I n stal l ation and Car e G u ide
A u t h e n t i c E x c e l l e n c e ™
2. Make sure that you are in your intended listening position.
3. While sitting, have someone measure your ear height from the floor directly
below your ear canal. You should be relaxed in your chair, as you would be when
listening to music (see graphic above).
4. Now measure the distance (on the floor) from the point on the floor below your
ear to the base of the loudspeaker, as shown in graphic above.
5. Refer to the Propagation Delay Tables and locate the corresponding ear height
A u t h e n t i c E x c e l l e n c e ™
e
ar
H
eiGHt
(M
eaSUred froM
f
loor
)
l
iSteninG
d
iStance
(M
eaSUred on
f
loor
)
S
e c t i o n
2 . 4 —m
o U n t i n g t h e
U
P P e r
m
o D U l e
27
for each module. There are two charts for the positioning of
the Upper Module. The first: “Sasha DAW Spike Length” is a ta-
ble determining the rear spike length. The Second, “Sasha DAW
Alignment Block Step,” specifies the step on which the rear
spike will rest.
6. Make a mark on the chart Number 1 “Sasha DAW Upper Module
Spike Length” indicating the proper rear spike for this module
as determined by the ear height and distance from listening
position.
Note: The shortest spikes (labeled AA) are always used at the front of the
Upper Module.
7. Make a mark on the second chart labeled “Sasha DAW Upper
Alignment Block Step” indicating Upper Module spike’s resting
position on the alignment block. Set this information aside as
you will refer to it in the next section. (See Section 5.)
Section 2.4—Mounting the Upper Module
Materials Required:
1. Correct spikes for the upper module.
2. Section 5 shows the use of the proper length of rear spike of
W i l s o n A u d i o S p e c i a l t i e s